This website uses cookies, which are necessary for the technical operation of the website.
Other cookies will only be used with your consent. Privacy.
Configuration
BG 830780 (Adapter for T250, R280, R310)
This adapter is of great practical help for measuring with the T250 laser or the R280 and R310 receiver. It allows to adjust the height of the laser or sensor by moving it on the attachment rods mounted on the Block magnet complete with a cross-bridge.
FIX 2-0363 (Adapter for R525, R280, R310)
This adapter is of great practical help for measuring roll parallelity. The laser receiver R545 or R280/R310 is mounted on the adapter. The rods in the profile can be mounted at the inner or outer positions for smaller or bigger rolls.
BT 989047 (with raster holes for BG 830119)
Special tape measure with raster holes at fixed distances to allow an exact parallel movement.
i.e. useful when moving reference lines.
BG 830205 (Adapter for Sweep Laser T330)
Using the swivel and tilt adapter you can align the laser level, irrespective of the surface below. The Adapter also allows for a parallel movement which is very useful when aligning the laser parallel to a reference object. The Adapter is accomodated with a 5/8" thread, and is also fitted with a three-point magnet arrangement underneath.
BG 830580 (Adapter for Sweep Laser T330)
This adapter is of great practical help for measuring the flanges. It can be used to install the T330 in vertical position at the flange.
BG 830119 (for Receiver R310)
This adapter is of great practical help for mounting R310 in a large variety of applications. Be it simply to mount the R310 on a Tripod, make a reference point on a wall, or pickup reference floor points. This adapter can also be used to make additional parallel reference lines. This is very useful for machine assembly personnel.
BG 830790 (Mounting Adapter for T250)
Magnetic attachment for T250 Laser. The attachment can be mounted under, in front of or behind the T250. Dimensions: 60 x 60 x 14,5 mm.
BT 948194 (Mounting Accessory for Laser Transmitter T250)
Adapter for mounting a T250 at the front, back or base.
The adapter is provided with a 5/8 inch thread to mount it on a tripod.
The adapter allows the T250 to mount at the borealign kit.
BG 830295 (Adapter for T330 and R545)
This adapter set is of great practical help for measuring flange parallelism. There is an adapter for the R545 Receiver and an adapter for the T330 Laser.
After measuring the first flange, the adapters with their Sensors are exchanged, the tripods are remaining at their position. After re-aligning, the second flange can be measured parallel to the first.
BG 830175 (Adapter for Laser Receiver R280 or R310)
This adapter is used together with a R310. It separates the holding function from the measuring function. It is essential for flange measurement for example. The linear guide and the probe-tip contact rather than a surface contact is essential for precision measurements. Inside is a spring mounted that ensures a good contact to the object.
BG 830195 (Mounting Accessory for Laser Receiver R280 and R310)
This adapter is used together with a R310. It separates the holding function from the measuring function. It is essential for flange measurement for example. The linear guide and the probe-tip contact rather than a surface contact is essential for precision measurements. Inside is a spring mounted that ensures a good contact to the object.
BT 943092 (Universal Magnet for R310, R280 or R525)
Block magnet for many measuring and fixing tasks.
The upper surfaces has an M8 thread for attachment purposes.
Dimensions: 60 x 50 x 55 mm, 750N
BT 948336 (Adapter for Laser Receiver R280 and R310)
Screw adapter with an M8 thread to enable the R310 or R280 to be mounted on different objects.
Installed adapter length: 30 mm
Extension bar for the screw adapter BT 948336 for the Receiver R280 und R310 with M8 thread.
Available Lengths:
80 mm (FIX 1-0658-080) | 300 mm (FIX 1-0658-300)
600 mm (FIX 1-0658-600) | 900 mm (FIX 1-0658-900)
BG 830315 (Accessory for R525, T250)
Block magnet (BT 943092) complete with a cross-bridge. This enables the mounting of a R545 Sensor or T250 laser with adapter BG 830780. Available attachment rods: BT 948155, BT 948156, BT 948157
BT 948138 (Mounting Accessory for R525, T250 for use with a magnet)
Cross bridge for use of steel rods BT 948155, BT 948156, BT 948157. This enables the mounting of a R545 Sensor or T250 laser with adapter BG 830780.
Mounting Accessory for R545, T250 and R310
Attachment Rods, M8, Diameter 10mm for fixturing a sensor.
Available Lengths:
60 mm (BT 948155), 80 mm (BT 948156), 150 mm (BT 948157)
BT 943105 (Universal Magnet for R280 Laser Receiver)
Block magnet for many measuring and fixing tasks.
The upper surfaces has an M6 thread for attachment purposes.
Dimensions: 40 x 40 x 40 mm, 600N
BG 831550 (Mounting Accessory for R280)
R280 adapter for standard adapter R310 (BT 948336) with M8 thread.
With this adapter the R280 can be used with all available mounting adapter and magnetic holder for the R310.
BG 831510 (Adapter for R280)
Block magnet (BT 943105) complete with a rotational adapter. This enables the mounting of a R280 Sensor on several surfaces.
The adapter can be mounted at the upper or lower side of the R280.
BT 840260 (Universal Magnet for µLine measurement components)
Block magnet for many measuring and fixing tasks.
The upper surfaces has an M6 thread for attachment purposes.
Dimensions: 40 x 40 x 40 mm, 600N
Block Magnet for fixed or flexible mounting of µLine measurement components.
|
|
|
| © 2024 Status Pro | Status Pro Maschinenmesstechnik GmbH · Mausegatt 19 · D-44866 Bochum |
Principles
Certificates & Technical Data
Jobs
Contact
Shop
Home
Principles
Certificates & Technical Data
Jobs
Contact
Privacy
Legal Info
Shop