The global spreading of the Corona virus COVID 19 leaves us facing challenges of an unexpected kind!


The well-being and safety of our employees at Status Pro GmbH (Ltd.) is of utmost priority. The result of our precautionary measures ensures continuity in delivering the highest standards of business and operational performance during these difficult times.


We are still 100% prepared and ready, either:

  • over the phone
  • through the Internet/vidcons etc.
  • on-site if necessary

Contact us!
+49 2327 9881 0

All departments are still contactable, under implementation of the new safety regulations (partly in shift work and partly as home-office).




We can still help you with training in spite of these difficult times.

  • In the Form of a Video-steam Conference or Demo:
    We can show you all our instruments and many applications including software through live streaming from our Training center.
  • In some cases we can also visit you at your premises:
    Sometimes there is no alternative performing test measurements on your machine.  Particularly if the is new for us or or the requirements are not typical.
    In such cases with some planning and with the correct protective equipment and procedures we can come to your facility.


Maybe this is a good opportunity to freshen up on training.

  • Per Video-conference:
    Either we do the measuring and stream to you or you do the measurement and stream the video to us. Just call us so that we can plan it.
  • Conventional training at your premises:
    With good planning we can still do conventional trading at your premises.
    We can insure that it is contact free and maintaining the appropriate distance.
    We have the necessary protective clothing.

Service work and surveying, on-site:

Utilise the time at hand to inspect and survey your machinery and ultimately bring it up to scratch for when the ball starts to roll again.
Our professional measurement and adjustment team are ready and prepared for an on-site visit. Observing the new safety regulations (distancing, hygiene, protective clothing etc.) , maintenance work can be carried out as safely as before.This could be an ideal time to have your machine geometry measured. Again with the appropriate planning and equipment we can still do the all the measurements as before. 

Please call us and we will see what we can arrange.



Your Status Pro Team


back to top
home    |    Machine Tool Alignment      Component List

Measuring Tools

T430 Laser-Transmitter

T430 Laser-Transmitter

Probably the best rotational laser money can buy!

Geradheit  Parallelität Ebenheit Rechtwinkligkeit

With this awesome tool you can measure straightness, flatness und squareness by using an intelligent software.

D140 Distance Meter


Distance Meter with Bluetooth (BG 832200)

The D140 is used to measure the position of the R540 receiver during a ProLine® measurement. It communicates with ProLine® per Bluetooth.

R540 PSD Laserempfänger mit abgewinkeltem Kopf und Bluetooth


Laser Receiver with PSD Technique (BG 830440)

The R540, like the R545 is a rugged but precise 2D Laser-Position detector. It was developed originally for a customers specific machine tool alignment applications. Because of the Wireless interface and its versatility it used today in a multitude of applications. Together with the ProLineV2 or Geo2000 Software application, we measure X,Y und Z simultaneously. If we use the T330 as a laser source we have a reference beam which automatically levels itself. These features together are very powerful and save a great deal of time on-site. Der R540 differs from the R545 as the receiver head has been displaced to sit in the guide surface plane. This is very important in certain applications.

Available as package with mobile viewer SP V520 and power supply (SP R540-P).

T250 hochpräziser Punktlaser zu Maschinenvermessung


Round Laser Source (BG 830750)

The T250 Laser is a highly developed Laser source that is very small in dimension, which is a great help when measuring where there´s not much room! The T250 Laser possesses a beam of outstanding quality.

Available as package with mounting adapter and power supply (SP T250-P)



Laser Receiver (BG 832600)

The R260 measures the position of the rotating laser beam. The CCD Sensor offers a total measurement range of 60mm.The laser-beam forms an reference plane. This reference plane can be measured by the R260.
The Receiver offers a display on top in combination with a attachable mirror. So you can view the values from the front, the top and from behind! Additional there is a LED display on the front which indicates the current position of the laserbeam.
By using the keypad at the side you can control the receiver and the laser. By using the bluetooth connection
values can be automatically send to our software by pressing a "measurement" button.

R280 Laser Empfänger 0,01mm Industrie Vermessung


Laser Receiver (BG 831500)

The R280 measures the position of the rotating laser beam. The CCD Sensor has total measurement range of 40mm. The beam forms an entire reference plane. The R280 is wireless and can measure up to a distance of 80m from the Laser.

Laser Receiver R290


Laser Receiver (BG 831600)

The R290 measures the position of the rotating laser beam. The CCD Sensor has total measurement range of 40mm. The beam forms an entire reference plane. The R290 is wireless and can measure up to a distance of 80m from the Laser.