back to top
home    |    Machine Geometry Applications      Component List

Mounting Accessory

Universal Adapter zur Montage von T250, R280, R310, Laser

Universal Adapter

BG 830780 (Adapter for T250, R280, R310)

This adapter is of great practical help for measuring with the T250 laser or the R280 and R310 receiver. It allows to adjust the height of the laser or sensor by moving it on the attachment rods mounted on the Block magnet complete with a cross-bridge.

Adapter zur Montage von R525, R280, R310 Walzen Parallelität

Roll Fixture

FIX 2-0363 (Adapter for R525, R280, R310)

This adapter is of great practical help for measuring roll parallelity. The laser receiver R545 or R280/R310 is mounted on the adapter. The rods in the profile can be mounted at the inner or outer positions for smaller or bigger rolls.

Maßband Parallelität

Measuring Tape

BT 989047 (with raster holes for BG 830119)

Special tape measure with raster holes at fixed distances to allow an exact parallel movement.
i.e. useful when moving reference lines.

T330 Halterung, Dreh und Schwenkadapter, einstellbarer Adapter

Mounting Kit

BG 830205 (Adapter for Sweep Laser T330)

Using the swivel and tilt adapter you can align the laser level, irrespective of the surface below. The Adapter also allows for a parallel movement which is very useful when aligning the laser parallel to a reference object. The Adapter is accomodated with a 5/8" thread, and is also fitted with a three-point magnet arrangement underneath.

Adapter zur Montage eines T330 an einem Flansch, Flanschvermessung, Laser

Flange Mounting Kit

BG 830580 (Adapter for Sweep Laser T330)

This adapter is of great practical help for measuring the flanges. It can be used to install the T330 in vertical position at the flange.

Bodenhalter für R310 Laser Empfänger zur Aufnahme von Referenzlinien an Papiermaschinen, Druckwerken, Folienanlagen

Floor, Wall and Tripod Adapter

BG 830119 (for Receiver R310)

This adapter is of great practical help for mounting R310 in a large variety of applications. Be it simply to mount the R310 on a Tripod, make a reference point on a wall, or pickup reference floor points. This adapter can also be used to make additional parallel reference lines. This is very useful for machine assembly personnel.

Magnethalterung für T250

Magnet Attachment

BG 830790 (Mounting Adapter for T250)

Magnetic attachment for T250 Laser. The attachment can be mounted under, in front of or behind the T250. Dimensions: 60 x 60 x 14,5 mm.



Adapter T250 Laser

Adapter for Tripod or Borealign Kit

BT 948194 (Mounting Accessory for Laser Transmitter T250)

Adapter for mounting a T250 at the front, back or base.

The adapter is provided with a 5/8 inch thread to mount it on a tripod.

The adapter allows the T250 to mount at the borealign kit.

Adapter zur Messung der Parallelität von 2 Flanschen, Laservermessung, Flanschparallelität

Adapter Set for Measurement of Flange Parallelism

BG 830295 (Adapter for T330 and R545)

This adapter set is of great practical help for measuring flange parallelism. There is an adapter for the R545 Receiver and an adapter for the T330 Laser.

After measuring the first flange, the adapters with their Sensors are exchanged, the tripods are remaining at their position. After re-aligning, the second flange can be measured parallel to the first.

Magnet mit Tastspitze zur Erfassung von diskreten Punkten mit Aufnahme für R310 Laser Empfänger

Magnet with Probe-Tip

BG 830175 (Adapter for Laser Receiver R280 or R310)

This adapter is used together with a R310. It separates the holding function from the measuring function. It is essential for flange measurement for example. The linear guide and the probe-tip contact rather than a surface contact is essential for precision measurements. Inside is a spring mounted that ensures a good contact to the object.

Magnet mit Tastspitze zur Erfassung von diskreten Punkten mit Aufnahme für R310 Laser Empfänger

Magnet with Spring Probe-Tip

BG 830195 (Mounting Accessory for Laser Receiver R280 and R310)

This adapter is used together with a R310. It separates the holding function from the measuring function. It is essential for flange measurement for example. The linear guide and the probe-tip contact rather than a surface contact is essential for precision measurements. Inside is a spring mounted that ensures a good contact to the object.

Universal Magnet für R310, R280 oder R525

Switch Magnet with Prism Bottom

BT 943092 (Universal Magnet for R310, R280 or R525)

Block magnet for many measuring and fixing tasks.
The upper surfaces has an M8 thread for attachment purposes.

Dimensions: 60 x 50 x 55 mm, 750N

Adapter für R310 Laser Empfänger, Messung, Vermessung

Screw Adapter M8

BT 948336 (Adapter for Laser Receiver R280 and R310)

Screw adapter with an M8 thread to enable the R310 or R280 to be mounted on different objects.

Installed adapter length: 30 mm

Verlängerung für Messadapter R310 80mm

Extension Bar for Screw Adapter M8

Extension bar for the screw adapter BT 948336 for the Receiver R280 und R310 with M8 thread.


Available Lengths:
  80 mm (FIX 1-0658-080)   |   300 mm (FIX 1-0658-300)
600 mm (FIX 1-0658-600)   |   900 mm (FIX 1-0658-900)

Magnet mit Halter für R525 Laserempfänger

Magnet

BG 830315 (Accessory for R525, T250)

Block magnet (BT 943092) complete with a cross-bridge. This enables the mounting of a R545 Sensor or T250 laser with adapter BG 830780. Available attachment rods: BT 948155, BT 948156, BT 948157

R525, T250 Halterung

Crosspiece

BT 948138 (Mounting Accessory for R525, T250 for use with a magnet)

Cross bridge for use of steel rods BT 948155, BT 948156, BT 948157. This enables the mounting of a R545 Sensor or T250 laser with adapter BG 830780.

Haltestange für R525, T250, R310, Verlängerung

Attachment Rod

Mounting Accessory for R545, T250 and R310

Attachment Rods, M8, Diameter 10mm for fixturing a sensor.

Available Lengths:
60 mm (BT 948155), 80 mm (BT 948156), 150 mm (BT 948157)

Universal Magnet für R280 Laserempfänger

Switch Magnet with Prism Bottom

BT 943105 (Universal Magnet for R280 Laser Receiver)

Block magnet for many measuring and fixing tasks.
The upper surfaces has an M6 thread for attachment purposes.

Dimensions: 40 x 40 x 40 mm, 600N

Halter für R280 Laserempfänger

Adapter for Standard Adapter

BG 831550 (Mounting Accessory for R280)

R280 adapter for standard adapter R310 (BT 948336) with M8 thread.
With this adapter the R280 can be used with all available mounting adapter and magnetic holder for the R310.

Magnet mit Halter für R280 Laserempfänger

Magnetic Holder

BG 831510 (Adapter for R280)

Block magnet (BT 943105) complete with a rotational adapter. This enables the mounting of a R280 Sensor on several surfaces.
The adapter can be mounted at the upper or lower side of the R280.

Universal Magnet für µLine Vermessungskomponenten

Switch Magnet with Prism Bottom UM1

BT 840260 (Universal Magnet for µLine measurement components)

Block magnet for many measuring and fixing tasks.
The upper surfaces has an M6 thread for attachment purposes.
Dimensions: 40 x 40 x 40 mm, 600N

Block Magnet for fixed or flexible mounting of µLine measurement components.

Stativ für µLine Interferometer

Tripod TS-1

BT 840230 (Accessory for µLine Interferometer)

SP Tripods for geometric measurements

Tripods


  • SP STATIV-01
    545 – 935 mm adjustment height
  • SP STATIV-01,5
    760 – 1700 mm adjustment height
  • SP STATIV-02
    870 – 1900 mm adjustment height
  • SP STATIV-03
    1160 – 2520 mm adjustment height
  • SP STATIV-04
    1880 – 3910 mm adjustment height
Low-Level Tripod

Low-Level Tripod

 


SP STATIV-005
100 – 290 mm adjustment height

Clamp stand

Clamp stand


SP STATIV-KL50
370 mm adjustment height