The global spreading of the Corona virus COVID 19 leaves us facing challenges of an unexpected kind!

 

The well-being and safety of our employees at Status Pro GmbH (Ltd.) is of utmost priority. The result of our precautionary measures ensures continuity in delivering the highest standards of business and operational performance during these difficult times.

 

We are still 100% prepared and ready, either:

  • over the phone
  • through the Internet/vidcons etc.
  • on-site if necessary

Contact us!
+49 2327 9881 0

All departments are still contactable, under implementation of the new safety regulations (partly in shift work and partly as home-office).

 

 

Sales:

We can still help you with training in spite of these difficult times.

  • In the Form of a Video-steam Conference or Demo:
    We can show you all our instruments and many applications including software through live streaming from our Training center.
     
  • In some cases we can also visit you at your premises:
    Sometimes there is no alternative performing test measurements on your machine.  Particularly if the is new for us or or the requirements are not typical.
    In such cases with some planning and with the correct protective equipment and procedures we can come to your facility.

Training:

Maybe this is a good opportunity to freshen up on training.

  • Per Video-conference:
    Either we do the measuring and stream to you or you do the measurement and stream the video to us. Just call us so that we can plan it.
     
  • Conventional training at your premises:
    With good planning we can still do conventional trading at your premises.
    We can insure that it is contact free and maintaining the appropriate distance.
    We have the necessary protective clothing.

Service work and surveying, on-site:

Utilise the time at hand to inspect and survey your machinery and ultimately bring it up to scratch for when the ball starts to roll again.
Our professional measurement and adjustment team are ready and prepared for an on-site visit. Observing the new safety regulations (distancing, hygiene, protective clothing etc.) , maintenance work can be carried out as safely as before.This could be an ideal time to have your machine geometry measured. Again with the appropriate planning and equipment we can still do the all the measurements as before. 

Please call us and we will see what we can arrange.

 

 

Your Status Pro Team

 

back to top
home

Legal Info

Status Pro Maschinenmesstechnik GmbH

Status Pro Maschinenmesstechnik GmbH
Mausegatt 19
D-44866 Bochum
Phone: + 49 (0) 2327 - 9881 - 0
Fax: + 49 (0) 2327 - 9881 - 81
E-Mail: info@statuspro.de

Management: David Foley

Company Registration Office: Amtsgericht Bochum
Registration Number: HRB: 5339
EU VAT Identification Number: DE 811 864 839
Reg Tax Number: 350/5722/1109

Person responsible for the content according to HGB §6 MDStV:
David Foley

The COPYRIGHT for company Name and Logo are held be Status Pro Maschinenmesstechnik GmbH.


Status Pro America

HEADQUARTERS
321 North Clark Street, Suite 1425
CHICAGO, IL 60654-4714
Phone: +1 (312) 585-832

info(at)statuspro.com · https://www.statuspro.com/us/


 


Status Pro Maschinendiagnostik GmbH

Status Pro Maschinendiagnostik GmbH
Industriestraße 11
D-85609 Aschheim bei München
Phone: + 49 (0) 89 - 904 864 - 0
Fax: + 49 (0) 89 - 904 864 - 19
E-Mail: info@statuspro.de

Management: Wilhelm Bachmeier, Bruno Josef Eing

Company Registration Office: Amtsgericht München
Registration Number: HRB: 222 382
EU VAT Identification Number: DE 304 719 946
Reg Tax Number: 143/182/81166

Person responsible for the content according to HGB §6 MDStV: 
Wilhelm Bachmeier

The COPYRIGHT for company Name and Logo are held be Status Pro Maschinendiagnostik GmbH.

Registered trademarks Status Pro Maschinenmesstechnik GmbH
Unless otherwise indicated, all trademarks on this website are subject to trademark rights of Status Pro Maschinenmesstechnik GmbH, including marks, model names, logos, and emblems.
BeltTension Pro, ProLine, ProLevel, ProOrbit, ProRoll and ProFlange are registered trademarks of Status Pro Maschinenmesstechnik GmbH.

Revision Date: October 2017

Opening Times:

WeekdayTimes
Monday - Friday 8.00 - 17.00
Saturday closed

Quality Management

Certificates ISO 9001:2015

 

Status Pro Maschinenmesstechnik GmbH is certified at ISO 9001:2015.

Scope:
Development, production and sales of machine measurement technologies and corresponding services.

PDF Downloads:
pdf Certificate english
pdf Certificate german

Seichter & Steffens Grafikdesin: Print und Web

Design and Coding:

Seichter & Steffens Grafikdesign GbR
Am Frache 19 · D-44229 Dortmund
https://www.seichter-steffens.de 

Terms of use and disclaimer

1. Site terms
By accessing Status Pro Maschinenmesstechnik GmbH web pages you agree to the following terms. If you do not agree to the following terms, please notice that you are not allowed to use the site.

2. Disclaimer
This site and the contents herein are provided as a convenience to you. The contents of Status Pro Maschinenmesstechnik GmbH web pages are provided on "as is" and "as available" basis. Status Pro Maschinenmesstechnik GmbH does not warrant that its Web pages will be uninterrupted or error-free. Status Pro Maschinenmesstechnik GmbH reserves the right to revise the pages or withdraw access to them at any time.

NO WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO WARRANTIES OF TITLE OR NON-INFRINGEMENT OR IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, IS MADE IN RELATION TO THE AVAILABILITY, ACCURACY, RELIABILITY OR CONTENT OF THESE PAGES. STATUS PRO SHALL NOT BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES, LOST PROFITS OR FOR BUSINESS INTERRUPTION ARISING OUT OF THE USE OF OR INABILITY TO USE THIS SERVICE, EVEN IF STATUS PRO INSTRUMENT HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME JURISDICTIONS DO NOT ALLOW EXCLUSION OF CERTAIN WARRANTIES OR LIMITATIONS OF LIABILITY, SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU. THE LIABILITY OF STATUS PRO WOULD IN SUCH CASE BE LIMITED TO THE GREATEST EXTENT PERMITTED BY LAW.

3. Copyright Information
The contents of Status Pro Maschinenmesstechnik GmbH www pages are Copyright © Status Pro Maschinenmesstechnik GmbH if not explicitly otherwise indicated. Any rights not expressly granted herein are reserved. Reproduction, transfer, distribution or storage of part or all of the contents in any form without the prior written permission of Status Pro Maschinenmesstechnik GmbH is prohibited except in accordance with the following terms. Status Pro consents to you browsing Status Pro pages on your computer or printing copies of extracts from these pages for your personal use only and not for redistribution unless consented to in writing by Status Pro. Individual documents in our web pages may be subject to additional terms indicated in those documents.
The use of this site and the content therein, is permitted to private, non-commercial use. The use of press releases and other documents classified as public is permitted in public communications if the source for the information has been stated.

4. Disclaimer
This site and the contents herein are provided as a convenience to you. The contents of Status Pro Maschinenmesstechnik GmbH World Wide Web pages are provided on "as is" and "as available" basis. Status Pro Maschinenmesstechnik GmbH does not warrant that its Web pages will be uninterrupted or error-free. Status Pro Maschinenmesstechnik GmbH reserves the right to revise the pages or withdraw access to them at any time. NO WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO WARRANTIES OF TITLE OR NON-INFRINGEMENT OR IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, IS MADE IN RELATION TO THE AVAILABILITY, ACCURACY, RELIABILITY OR CONTENT OF THESE PAGES. STATUS PRO SHALL NOT BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES, LOST PROFITS OR FOR BUSINESS INTERRUPTION ARISING OUT OF THE USE OF OR INABILITY TO USE THIS SERVICE, EVEN IF STATUS PRO INSTRUMENT HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME JURISDICTIONS DO NOT ALLOW EXCLUSION OF CERTAIN WARRANTIES OR LIMITATIONS OF LIABILITY, SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU. THE LIABILITY OF STATUS PRO WOULD IN SUCH CASE BE LIMITED TO THE GREATEST EXTENT PERMITTED BY LAW.

5. Third Party Web Sites and Information
For your easy accessibility Status Pro may include links to sites on the Internet that are owned or operated by third parties. By linking to such third-party site, you shall review and agree to that site´s rules of use before using such site. You also agree that Status Pro has no control over the content of that site and cannot assume any responsibility for material created or published by such third-party sites. In addition, a link to a non-Status Pro site does not imply that Status Pro endorses the site or the products or services referenced in such third party site.

6. Reviews, Comments, Communications And Others Content
By submitting material to any of our servers, for example, by e-mail or via the Status Pro Maschinenmesstechnik GmbH World Wide Web pages, you agree that: (a) the material will not contain any item that is unlawful or otherwise unfit for publication; (b) you will use reasonable efforts to scan and remove any viruses or other contaminating or destructive features before submitting any material; and (c) you own the material or have the unlimited right to provide it to us and Status Pro Maschinenmesstechnik GmbH may publish the material free of charge and/or incorporate it or any concepts described in it in our products without accountability or liability (d) you agree not to take action against us in relation to material that you submit and you agree to indemnify us if any third party takes action against us in relation to the material you submit.

7. Trademark Information
Status Pro is a registered trademark of Status Pro Maschinenmesstechnik GmbH. Other product and company names mentioned herein may be trademarks or trade names of their respective owners.
Copyright © Status Pro Maschinenmesstechnik GmbH. All rights reserved.