Home Condition Monitoring Machine Geometry Shaft Alignment

Characteristics

---

Express Alignment – a smarter way to work

The fastest and safest way of aligning a rotating machine is by using a laser-based alignment system. Efficient service technicians use the Fixturlaser XA in three simple stages to perform their work as quickly as possible.

Express-Mounting The fixtures are pre-mounted in the case and the measuring units are quickly adjusted using the snap-on fixtures. You can choose wireless data transfer as an option if you wish to avoid cables.   Express-Adjustment Extra large CCD-detectors eliminate the need to adjust the lasers.   Express-rough alignment The extra large detectors minimize the need for rough alignment. Not even large angular errors or long measurement distances are a problem due to CCD-technology.               Express-Measurement The Fixturlaser XA registers the measurement points automatically. Animation in the form of red and green fields on the color screen show exactly how much you need to rotate the shaft before the next measurement is automatically registered.   Express-results All measurement results are shown directly on the color screen with large distinct figures. Information about the exact position of the machine and the applicable correction values are complemented with color codes to highlight any required corrections.   Express-alignment You will quickly hit the large detector surface, even with large angular errors. Arrows on the display show the direction and by how much the machine must be realigned.               Express-Documentation You can create and download fast, flexible documentation by using the system’s USB ports and a USB memory.   Express-removal The pre-mounted fixtures make removal and packing of the Fixturlaser XA quick, which also eliminate the risk of loosing parts.   Express-service With the Fixturlaser XA, the job is done quickly and the service technician is ready for the next assignment.