Article List
T330 Sweep Laser ( BG 830203)
The T330 levelling laser makes even difficult measuring tasks easy!A laser transmitter transmits the signal and a detector measures the beam position.
Done!
Information with praxis examples Manual T310/330 Technical data
SP T250 Tubular or round Laser source (BG 830750)
The T250 Laser is a highly developed Laser source that is very small in dimension, which is a great help when measuring where there“s not much room! The T250 Laser possesses a beam of outstanding quality.Available as package with mounting adapter and power supply: (SP T250-P)
R310 II Laser receiver (BG 830140/1)
The R310 measures the position of the rotating laser beam. The CCD Sensor has total measurement range of 80mm. The beam forms an entire reference plane. The R310 is wireless and can measure up to a distance of 80m from the Laser.| Measuring range: | 80 mm |
| Resolution: | 0.01 mm |
| Accuracy: | +/- 0.02 + 0.3% linearity |
| IR control: | Range: 50 m |
| Interface: | Rs232 / Bluetooth (optional) |
| Power supply: | /rechargeable) battery 6x AA |
| Temperature range: | 0-50 °C |
R280 Laser receiver (BG 831500)
The R280 measures the position of the rotating laser beam. The CCD Sensor has total measurement range of 40mm. The beam forms an entire reference plane. The R280 is wireless and can measure up to a distance of 80m from the Laser.| Measuring range: | 40 mm |
| Resolution: | 0.01 mm |
| Accuracy: | +/- 0.02 + 0.3% linearity |
| IR control: | Range: 50m |
| Interface: | Bluetooth |
| Power supply: | rechargeable Li-Ion battery |
| Temperature range: | 0-50 °C |
R525 Laser Receiver with PSD Technique (BG 830390)
The R525 is a rugged but precise 2D Laser-Position detector. It was developed originally for machine tool alignment applications. Because of the Wireless interface and its versatility it used today in a multitude of applications. Together with the ProLineV2 Software application we measure XY und Z simultaneously. If we use the T330 as a laser source we have a reference which automatically levels itself. These features together are very powerful and save a great deal of time on-site.Available as package with mobile viewer SP V520 and power supply: (SP R525-P)
Datenblatt 2-Achsempfänger SP R52024x24mm PSD, without lens
| Measuring range: | 20x20mm |
| Resolution: | 1μm in X & Y |
| Accuracy: | +/- 2μm |
| Laser sensivity: | 650nm / modulated |
| Wireless: | Bluetooth class 1a (range 30m) |
| Interface: | Rs232 / Bluetooth |
| Power supply: | 12V rechargeable battery |
| Operation with battery: | 8 hours |
| Charging time: | 2 hours – 90% |
| Protection class: | IP 65 |
R510 Laser Receiver with PSD Technique (BG 830300)
The R510, like the R520 is a rugged but precise 2D Laser-Position detector. It was developed originally for a customers specific machine tool alignment applications. Because of the Wireless interface and its versatility it used today in a multitude of applications. Together with the ProLineV2 or Geo2000 Software application, we measure X,Y und Z simultaneously. If we use the T310 as a laser source we have a reference beam which automatically levels itself. These features together are very powerful and save a great deal of time on-site.Der R510 differs from the R520 as the receiver head has been displaced to sit in the guide surface plane. This is very important in certain applications.
Available as package with mobile viewer SP V520 and power supply: (SP R510-P)
18x18 mm Optical Range
| Measuring range: | 20x20mm |
| Resolution: | 1μm in X & Y |
| Accuracy: | +/- 2μm |
| Laser sensivity: | 650nm / modulated |
| Wireless: | Bluetooth class 1a (range 30m) |
| Interface: | Rs232 / Bluetooth |
| Power supply: | 12V rechargeable battery |
| Operation with battery: | 8 hours |
| Charging time: | 2 hours – 90% |
| Protection class: | IP 65 |
DU 320 Rugged UMPC with touchscreen (IT 200410)
Rugged UMPC for industrial on-site. The UMPC offers protectors, shockproof design, holder for hand / arm.- Change Exteral Batt-Pack during use.
- Shockproof
- Water resistant
Standard accessories:
IT 200207 External Li-Ion Akku.
Optional accessories:
IT 200208 Extern Charging station for IT 200207
µLine Laser Interferometer (BG 840200)
µLine the precise Laser Interferometer for the compensation of tool machinery, assembly and quality control. Often a accuracy from below 1µm is required to meet the specification. Status Pro offers a variety of tools to fulfill the required accuracy. The µLine is designed for the man in the workshop to measure tool machinery in 3D and to calibrate it. The system is developed now for 20 years and optimized for practical use. µLine data sheet and description
µLevel Precision Level system (BG 840100)
µLevel is the precise Level for the measurement of tool machinery, assembly and quality control. Often a accuracy from below 1µm is required to meet the specification. Status Pro offers a variety of tools to fulfill the required accuracy. The µLevel is designed for the man in the workshop to measure tool machinery and measuring machines. The system is developed now for 20 years and optimized for practical use. Even the coulor is optimised for a better recognition. µLevel data sheet and description
Leica DISTO™ Bluetooth distance meter(FIX DISTO-P II)
Bluetooth® data transfer - for perfect transfer of measured values!With the Leica DISTO™, measuring does not stop with the display of the measured value: the data can be processed immediately with a pocket PC or a laptop. The transfer software DISTO™ transfer is included in the scope of delivery.
• Measuring range 0.05 to 200m, typical accuracy ±1.0 mm
• Power Range Technology™: measurement distance up to 100 m
• Integrated camera viewfinder with zoom function
• Integrated BLUETOOTH® technology
• Navigation keys
• IP54
• Precise, fast and reliable measurements
• Enables measurement of large distances
• Wireless and error-free data transfer to pocket PCs or laptops
• Protected against splash water and dust
RC310 Remote Control for T330 and R310 Monitor (BG 830930)
- Remote control for the T330- Remote Display of current R310 values
The RC310 is of great practical use in most applications:
- for establishing reference lines in roll parallelism
- for adjusting the T330 laser position
- it saves you a great deal of shoe leather on-site
T330 accessory, R310 accessory
SP V520 Mobile viewer for R510/R525 (BG 830970)
The Viewer V520 is simply connected to any R510, R520 or R525 Receiver. It will immediately display current sensor measured values and status. It also be used to Zero the current point and can store values.Functions:
- Display values
- Zero Position
- Avg. Settings
- Language Settings
- Current, Voltage and Temperature
R525 accessory, R510 accessory
Mounting Kit for T330 (BG 830205)
Using the swivel and tilt adapter you can align the laser level, irrespective of the surface below. The Adapter also allows for a parallel movement which is very useful when aligning the laser parallel to a reference object. The Adapter is accomodated with a 5/8" thread, and is also fitted with a three-point magnet arrangement underneath. T330 accessory
T330 flange mounting kit (BG 830580)
This adapter is of great practical help for measuring the flanges. It can be used to install the T330 in vertical position at the flange.T330 accessory
Universal adapter T250, R280, R310 (BG 830780)
This adapter is of great practical help for measuring with the T250 laser or the R280 and R310 receiver. It allows to adjust the height of the laser or sensor by moving it on the attachment rods mounted on the Block magnet complete with a cross-bridge.T250 accessory, R280 accessory, R310 accessory
Roll fixture for R525, R280, R310 (FIX 2-0363)
This adapter is of great practical help for measuring roll parallelity. The laser receiver R525 or R280/R310 is mounted on the adapter. The rods in the profile can be mounted at the inner or outer positions for smaller or bigger rolls.R525 accessory, R280 accessory, R310 accessory
T250 adapter for tripod or borealign kit (BT 948194)
Adapter for mounting a T250 at the front, back or base.The adapter is provided with a 5/8 inch thread to mount it on a tripod.
The adapter allows the T250 to mount at the borealign kit.
T250 accessory
Floor, wall and Tripod adapter for R310 (BG 830119)
This adapter is of great practical help for mounting R310 in a large variety of applications.Be it simply to mount the R310 on a Tripod, make a reference point on a wall, or pickup reference
floor points. This adapter can also be used to make additional parallel reference lines. This is very useful for machine assembly personnel.
R310 assessory
Measuring tape with raster holes for BG 830119 (BT 989047)
Special tape measure with raster holes at fixed distances to allow an exact parallel movement.i.e. useful when moving reference lines.
Adapters for the measurement of flange parallelism(BG 830295)
This adapter set is of great practical help for measuring flange parallelism.There is an adapter for the R525 Receiver and an adapter for the T330 Laser.
After measuring the first flange, the adapters with their Sensors are exchanged, the tripods are remaining at their position. After re-aligning, the second flange can be measured parallel to the first.
T330 accessory, R525 accessory
Magnet with Probe-tip (BG 830175)
This adapter is used together with a R310 or R280. It separates the holding function from the measuring function. It is essential for flange measurement for example. The linear guide and the probe-tip contact rather than a surface contact is essential for precision measurements. R310 accessory, R280 accessory
Magnet with spring - Probe-tip (BG 830195)
This adapter is used together with a R310. It separates the holding function from the measuring function. It is essential for flange measurement for example. The linear guide and the probe-tip contact rather than a surface contact is essential for precision measurements. Inside is a spring mounted that ensures a good contact to the object.R310 accessory, R280 accessory
Switch magnet with prism bottom - 60x50x55 mm - M8 - 750N (FIX 1-0083)
Block magnet for many measuring and fixing tasks.The upper surfaces has an M8 thread for attachment purposes.
Dimensions: 60 x 50 x 55 mm, 750N
R310 accessory, R280 asseccory
Screw adapter M8 (FIX 1-0629)
Screw adapter with an M8 thread to enable the R310 or R280 to be mounted on different objects.Installed adapter length: 30 mm
R310 accessory, R280 accessory
Magnet for R525, T250(BG 830315)
Block magnet (FIX 1-0083) complete with a cross-bridge. This enables the mounting of a R525 Sensor or T250 laser with adapter BG 830780. Available attachment rods: BT 948155, BT 948156, BT 948157R525 accessory, T250 asseccory
Crosspiece for use with a magnet to mount the R525 or T250 (BT 948138)
Cross bridge for use of steel rods BT 948155, BT 948156, BT 948157. This enables the mounting of a R525 Sensor or T250 laser with adapter BG 830780.R525 accessory, T250 asseccory
Extension bar for screw adapter FIX 1-0629 (FIX 1-0658-080, FIX 1-0658-300, FIX 1-0658-600, FIX 1-0658-900)
Extension bar for the screw adapter FIX 1-0629 for the Receiver R280 und R310 with M8 thread.Available lengths:
80 mm (FIX 1-0658-080)
300 mm (FIX 1-0658-300)
600 mm (FIX 1-0658-600)
900 mm (FIX 1-0658-900)
R280 attachment, R310 attachment
Attachment rod, 60 - 150 mm length (BT 948155, BT 948156, BT 948157)
Attachment rod: 10mm diameter, M8 thread enabling fixture of a sensor.Available lengths:
60 mm (BT 948155)
80 mm (BT 948156)
150 mm (BT 948157)
R525 attachment, T250 attachment, R310 attachment
R280 adapter for FIX 1-0629(BG 831550)
R280 adapter for standard adapter R310 (FIX 1-0629) with M8 thread.With this adapter the R280 can be used with all available mounting adapter and magnetic holder for the R310.
R280 attachment
Magnetic holder for R280(BG 831510)
Block magnet (BT 943105) complete with a rotational adapter. This enables the mounting of a R280 Sensor on several surfaces.The adapter can be mounted at the upper or lower side of the R280.
R280 attachment
Switch magnet with prism bottom - 40x40x40 mm - M6 - 600N (BT 943105 )
Block magnet for many measuring and fixing tasks.The upper surfaces has an M6 thread for attachment purposes.
Dimensions: 40 x 40 x 40 mm, 600N
R280 asseccory
Borealign kit 1 - Basic system for R525(BG 832060)
Specially developed set for measuring Bores, Turbines and similar tasks. Complete with all the necessary attachments and extensions plus a large sortiment of fixings and screws to enable mounting in the most difficult and adverse conditions.Kit 1 includes the adapter for the R525 for bore diameters of 60 - 450 mm.
R525 accessory
Borealign kit 2 - Basic system for T250(BG 832070)
Specially developed set for measuring Bores, Turbines and similar tasks. Complete with all the necessary attachments and extensions plus a large sortiment of fixings and screws to enable mounting in the most difficult and adverse conditions.Kit 2 includes the adapter for the T250 laser for bore diameters of 60 - 450 mm.
T250 accessory
Borealign kit 3 - extension for R525 and T250(BG 832080)
Specially developed set for measuring Bores, Turbines and similar tasks. Complete with all the necessary attachments and extensions plus a large sortiment of fixings and screws to enable mounting in the most difficult and adverse conditions.Kit 3 includes the extensions for the R525 and T250 for bore diameters of 450 - 1200 mm.
Extensions for bigger diameters are available on demand.
R525 accessory, T250 accessory
Borealign kit 4 - additional layer with profiles(BG 832090)
Specially developed set for measuring Bores, Turbines and similar tasks. Complete with all the necessary attachments and extensions plus a large sortiment of fixings and screws to enable mounting in the most difficult and adverse conditions.Kit 4 includes an additional layer for case BT 990017 and additional profiles.
Power supply cable for T330 / R310 (BG 800026)
Power supply cable for the T330 / R310 with straight plug.12 V, 450 mA
incl. adapter
T330 assessory, R310 assessory
Power supply cable for R525 / T150 / T250 (BG 800025)
Power supply cable for the T150/T250/R510/R520/R525 with straight plug.12 V, 450 mA
incl. adapter
T250 assessory, R525 assessory
Battery charger DU320 (IT 200208)
External battery charger for batterys of the display unit DU 310 and DU 320. While using a second battery at the display unit, the first will be charged in the charging station. The exteral battery pack can be changed during use.
External Battery for DU320 (IT 200207)
External battery for the display unit DU 310 and DU 320. While using a second battery at the display unit, the first will be charged in the charging station. The exteral battery pack can be changed during use.
Tripods for Laser and/or sensors (FIX STATIV-01-P … FIX STATIV-04-P)
Tripod 01-P:
Sturdy and suitable for all geometrical tasks. Adjustment range 545mm - 935mm, weight 5,5kg, incl. adapter. Laser measurement range with the Laser mounted using the BG 830205, 815mm - 1205mm.
Tripod 1.5-P
Sturdy and suitable for all geometrical tasks. Adjustment range 760mm – 1700mm, weight 12kg, incl. adapter. Laser measurement range with the Laser mounted using the BG 830205, 1030mm – 1970mm.
Tripod 02-P:
Sturdy and suitable for all geometrical tasks. Adjustment range 870mm – 1900mm, weight 12kg, incl. adapter. Laser measurement range with the Laser mounted using the BG 830205, 1140mm – 2170mm.
Tripod 03-P:
Sturdy and suitable for all geometrical tasks. Adjustment range 1160mm – 2520mm, weight 13kg, incl. adapter. Laser measurement range with the Laser mounted using the BG 830205, 1430mm – 2790mm.
Tripod 04-P:
Sturdy and suitable for all geometrical tasks. Adjustment range 1880mm – 3910mm, weight 19kg, incl. adapter. Laser measurement range with the Laser mounted using the BG 830205, 2150mm – 4180mm.
Laser kit Case small with foam inlays - version T330 (BG 990100)
Rugged Case IP65 with wheels and telescope handle.The small case is complete with the following main foam inlays:
- BT 990020: Foam inlay for R310BT R525
- BT 990027: Foam inlay for UMPC
- BT 990029, BT 990030: Foam inlay for T330
Laser kit Case small with foam inlays - version T330, R280 (BG 990104)
Rugged Case IP65 with wheels and telescope handle.The small case is complete with the following main foam inlays:
- BT 990043: Foam inlay for 2x R280, R525 or R310
- BT 990027: Foam inlay for UMPC
- BT 990029, BT 990030: Foam inlay for T330
Laser kit Case small with foam inlays - version T250 (BG 990101)
Rugged Case IP65 with wheels and telescope handle.The small case is complete with the following main foam inlays:
- BT 990020: Foam inlay for R310BT R525
- BT 990027: Foam inlay for UMPC
- BT 990036, BT 990037: Foam inlay for T250
Big laser system case with foam inlays (BG 990105)
Rugged Case IP65 with wheels and telescope handle.This "big" case contains the following foam inlays:
- BT 990007: Foam inlay for T330, RC310, Disto and accessory
- BT 990008: Foam inlay for 3x R310, 3x BG 830119 and magnetic holder
- BT 990009: Foam inlay for R5XX, DU320 and accessory
- BT 990007: Foam inlay top cover for BT 990008
Borealign system case without foam inlays (BT 990017)
Rugged Case IP65 for the different borealign kits. Each case can carry 2 different layer:- BG 832060: Borealign Kit 1
- BG 832070: Borealign Kit 2
- BG 832080: Borealign Kit 3
- BG 832090: Borealign Kit 4